What is Power Flushing ?
It is the process by which heating systems are forcibly cleansed using water at high velocity, but low pressure, so that no physical damage is caused to the system.
 

  
Why Power Flush my Heating System ?
   - To prevent corrosion to your pipes, system & boiler
   - Eliminate sludge
   - Eliminate lime scale
   - Save £100's on power bills over the years
   - Extend the life of your boiler
   - Prevent banging & rattling of pipes
   - Save £100's on repairs & new boilers
   - More efficient system
 
When should I have my system power flushed ?
It is recommended by industry standards that your heating system and boiler should be power flushed annually to optimize it's performance.

OR

After Repairs
   It is important to power flush after repairs as existing debris is often mobilised by alterations to the system/piping and may then accumulate in the boiler heat exchanger, causing noisy operation, reduced efficiency and, in extreme circumstances, failure of the boiler. The high efficiency and compactness of modern boilers, developed to minimise fuel costs and pollution, means that they are more susceptible to problems caused by debris in the system water.
  
It is prudent to power flush a heating system immediately before fitting a new boiler to an existing system to prevent possible future problems. Many systems are found to contain corrosion and sludge, even if no flow problems have yet shown themselves.
    
At the end of the flushing process, the system contains fresh clean water and reinstatement of the system to normal operation takes only a few minutes.
 
Note :
System flushing will not remedy design or mechanical faults, which should be rectified, but in many cases it will cure the problems caused by these.
  
Regular inspections and maintenance of your Heating System can help to extend its life for many years and so if you think it's time for a maintenance check please go to the Contact us or On-Line Quote sections of this web site.